MASTERPAV AS28 Gloss Acrylic Sealer 1lit Per Can

Reference: MCSSG56-1L

MASTERPAV AS28 Gloss Acrylic Sealer 1lit Per Can

Reference: MCSSG56-1L
MYR27.30
Tax included

MASTERPAV AS28 Gloss Acrylic Sealer is a solvent-based clear finish that creates a wet look seal for the concrete flooring. It is highly advised to apply MASTERPAV AS28 by roller for an even finishing. It dries fast and imparts onto the concrete surfaces a gloss finish and good protection from surface staining.  It could be coated on the interior and exterior concrete imprint surfaces, pebble floors, slate, and other concrete flooring materials. 

 

Product Description

  • MASTERPAV AS28 Gloss Acrylic Sealer is a solvent-based clear finish that creates a wet look seal for the concrete flooring. It is highly advised to apply MASTERPAV AS28 by roller for an even finishing. It dries fast and imparts onto the concrete surfaces a gloss finish and good protection from surface staining.  It could be coated on the interior and exterior concrete imprint surfaces, pebble floors, slate, and other concrete flooring materials. 
  • It is important to ensure that the surface receiving the MASTERPAV AS28 is dry, clean, and free from dust prior to application to ensure maximum adhesion.

 

Benefits

  • Gloss finishing
  • Good resistance to fungal, alkali attack, dust collection
  • Resistant to weathering on exposure
  • Good water-resistant, washable finish
  • Easy to maintain
  • Good surface protections

 

Recommended Application

 

MASTERPAV AS28 Gloss Acrylic Sealer is recommended for finish coat on the interior and exterior concrete surfaces, slate floor, and finishing of pre-cast slabs. It can also be coated on metal, electronic accessories, wood, and furniture surfaces.

 

Instruction for Use

 

SURFACE PREPARATION: Ensure the substrate is clean and dry. Remove any grease by detergent or alkaline etch. Loosely bound particles can be removed by an air blower. Any algae, mildew, or moss should be removed by Masterpav Fungicidal Wash.

 

Mixing

 

Stir well before using. Material may separate during long term storage.

 

Application

 

Apply using roller or brush.  Allow sealer to dry for 24hours for light traffic and at least 72 hours for heavy vehicles. For maximum protection, two coats of MASTERPAV AS28 Gloss Acrylic Sealer can be applied, wait for approximately 1 – 2hours between coats.

 

Please note

MASTERPAV AS28 Gloss Acrylic Sealer is not recommended for heavy traffic area applications and substrates that contain high moisture. Spot test can be conducted to determine the surface which can receive MASTERPAV AS28 Gloss Acrylic Sealer.

 

 

Remarks

All statements and recommendations are based on the experience we believe to be reliable. The use or application of these products being beyond the control of the seller or manufacturer, neither the seller nor the manufacturer make any warranty expressed or implied, as to results or hazard from its use. The suitability, risk, and liability what so ever of a product for any intended use shall be solely up to the user.

 

 

Special Note

 

Stored in a cool and dry area, away from heat sources, flammable areas. Containers should be sealed and tightly closed and sealed upright. MASTERPAV Sealer has a shelf life of up to 1 year in its original, sealed, unopened container from the date of production.

 

Return Policy

  • Contact Seller for any defect/wrong size/wrong design/wrong color and etc WITHIN 48 HOURS after receiving the products.
  • No refund is given if a complaint made later than 48 hours after received the products.
MCSSG56-1L
1000 Items